Warm spots on the floor, the sound of water under the concrete or a bill that keeps climbing. We locate the leak under the slab before any floor gets cut, so the opening is small and in the right place.
The Basics
A slab leak is a leak in a water line that runs under or inside the concrete slab of your home. Because the pipe is below the floor, the leak can run for a long time before you see damage.
A warm or hot spot on the floor
The sound of running water when everything is off
A water meter that keeps moving with every fixture off
A bill that climbs with no change in how you use water
Damp or discolored flooring, carpet or baseboards
Cracks in the floor or walls
Low hot water pressure, or a water heater that runs too much
The meter test is the first step. Turn off every fixture, then check the low-flow indicator. If it keeps moving and the main line outside is fine, a leak under the slab is one of the possibilities.
Our Methods
We start without cutting. We check the meter and pressure, then use acoustic listening to hear the leak through the concrete, thermal imaging to look for warm spots from hot water lines, and moisture mapping to narrow the area. We confirm with a second method before marking the spot. The goal is one small, precise opening.
The goal is one small, precise opening.
Castle Rock Homes
A slab leak can start from a worn pipe, a poor joint, high water pressure, the pipe rubbing against concrete or a gravel bed, or movement in the soil. Parts of Douglas County sit on expansive clay that swells and shrinks with moisture, and that movement can stress lines under and near a foundation. Pressure above 75 psi adds more strain, and most pressure changes come from your home’s PRV.
After We Find It
After we locate the leak, there are usually a few paths. Which one fits depends on the pipe, the location and how many leaks there are.
Repair the line in place, after a small opening in the slab
Reroute the line around the damaged section, through walls or the attic
Replace the line if it is worn or has more than one leak
We explain what we found and why we recommend a path, then give you the options in writing.
How It Works
Warm spots, sounds, bill numbers.
Same-day when we have an opening.
Photos, the location and repair options in plain words.
Castle Rock Water
A slab leak can run for weeks before you notice. You may qualify for a leak adjustment on your Castle Rock Water bill. Check your eligibility, keep our written report and ask what documents they want. We cannot promise a credit.
We keep slab leak work affordable and give you the price for each option before work starts.
Service Area
We provide slab leak detection throughout Castle Rock, including The Meadows, Founders Village, Crystal Valley Ranch and Terrain, and in Castle Pines.
We locate slab leaks before any floor is cut, with photo proof, repair options and a price.
FAQ
Warm spots on the floor, the sound of running water with everything off, a meter that keeps moving and a bill that climbs for no reason are the usual signs. A leak detection visit confirms it.
Yes. We locate it with acoustic listening, thermal imaging and moisture mapping, then mark the spot. The slab is only opened if you decide to repair the line there.
It can damage flooring, baseboards and drywall, grow mold, raise your water bill and in time stress the foundation. Finding it early keeps the damage and the repair smaller.
No. Many Castle Rock homes have basements, crawl spaces or both, and the slab may be a basement floor or a garage floor. If you have a concrete floor over water lines, a slab leak is possible.
Policies differ. Many cover sudden water damage but not always the cost of finding the leak or repairing the pipe itself. Check your policy or ask your insurer, and keep our report with photos for the claim.
You may qualify for a leak adjustment. Check your bill’s eligibility with Castle Rock Water. Keep a written record of the leak and the repair, and ask what documents they want, since we cannot promise a credit.
Keep Exploring